Description

Wilbur Curtis

Authorized Distributor

Model:  PCGT3800

Wilbur Curtis 3 Station Primo Cappuccino with Hot Water Faucet and 1-5 lb & 2-10 lb Hoppers

The first thing you’ll notice about the Primo Cappuccino is its smooth Euro-Styled lines and cup locator guides. Built right into the oversized alcove, the guides ensure proper alignment with the dispensing nozzle while the increased cup clearance accommodates the most popular cup sizes. The PCGT captures attention from the moment your customers walk in... stimulating more impulse sales. Curtis has incorporated the industry’s most advanced digital technology – G3 – into the Primo Cappuccino Machine. It’s this G3 technology that dramatically simplifies use, minimizes maintenance costs and increases profitability.

FEATURES AT A GLANCE

• G3 ADS™ Digital Control Module (G3/ADS™) – Provides Precise Control Over All Critical Blending And Dispensing Functions
• Pre-Dispense – Easy To Use. Choose A Size From Small, Medium Or Large By The Touch Of A Button
• Irradiant LCD Digital Display – Extra Bright And Easy To See
• Scroll-Through Precision Programming – Adjust Powder Flow In 5% Increments And Water Temperature From 80°F To 200°F To Create The Perfect Hot Or Cold Beverage For Your Operation
• On-Board Diagnostics – Continually Senses Proper Operation. A Service Number Will Be Displayed If Technical Assistance Is Required
• Fully Sealed – G3 Chips And Processors Are Encapsulated In An Impact-Resistant Polymer, Virtually Eliminating The Harmful Effects Of Heat, Moisture And Physical Damage
• Direct Drive Mixing Augers – Ensure Smooth High-Speed Blending Of Powdered Drinks
• High Velocity Whipping Motors – Sloped Whipping Motors Ensure Smooth, High-Speed Blending Of Powdered Drinks
• Digital Temperature Control – Precisely Senses Water Temperature And Level To Maximize Energy Efficiency And Prevent Heating Element Burnout
• Fixed-Flow Water System – Ensures Precise Drink Blending Regardless Of Irregularities In Water Pressure/Volume

DIMENSIONS

Height (in.) 34.840”

Width (in.) 14.270”

Depth (in.) 24.390”

Cup Clearance (in.) 8.38”

ELECTRICAL

Phase 1

Volts 120

Amps 15.0

Heat Configuration 0.8 oz/sec

Wire 2W+G

Watts 1800

Hertz 50/60

WATER

Connector 1/4” Flare

Pressure 20-90 psi

Min. Flow Rate 1.0 GPM

Tank Volume 5.3 Gal

SHIPPING

Ship Height (in) 44.00”

Ship Width (in) 25.00”

Ship Depth (in.) 34.00”

Ship Weight: 125.00 lbs

Ship Cube: 21.64 cuft

GENERAL

Certification: UL/ NSF

Warning: Proposition 65 Warning — Applies to the State of California Only. LEARN MORE >

Installation Requirements

1. A secure surface capable of supporting the weight of the appliance.
2. For units without an attached cord set: Appropriately sized, UL listed, grounding type power cable to meet the electrical specifications for the appliance. If you have questions about the correct cable size and length, consult a qualified installer. If the unit will be hard wired to a junction box, the power cable must be long enough so that it can be moved for cleaning underneath.
3. A grounded electrical connection to an electrical circuit that meets the electrical specifications of the appliance (see SPECIFICATIONS). The circuit must be protected by the appropriate sized circuit breaker. If you are not certain that the existing circuit meets the requirements for your unit, consult a licensed electrician.
4. A water filtration system is required to maintain trouble-free operation.
5. Potable water supply line connection from the water filter capable of supplying the minimum flow rate required by the specifications. The water supply line must be able to connect to the flare fitting on the back of the unit. See the SPECIFICATIONS section for the correct size. The water line should also be capable of being controlled by a shut off valve. Do not connect the water line to a saddle or needle valve.