Description

Wilbur Curtis

Authorized Distributor

Model:  G4GEMXN63A1000

Wilbur Curtis G4 GemX Narrow IntelliFresh Twin 1.5 Gallon Coffee Brewer with FreshTrac Dispenser

Coffee Machine Depot USA is proud to present the Wilbur Curtis G4 GemX Narrow IntelliFresh Twin 1.5 Gallon Coffee Brewer with FreshTrac Dispenser. Double your Counter space with this brewer and dispensers. Each warmer holds two 1.5 Gal dispensers which will double up the volume of the standard GemX system. Shorten the installation process by choosing from a selection of preloaded recipes and no calibration required!

*** DISPENSERS INCLUDED ***

FEATURES AT A GLANCE

• Generation Four (G4) Digital Control Module – provides precise control over all aspects of brewing: time, temperature, volume plus specialty coffee needs from pre-infusion to pulse-brewing to water bypass. Large, 4.3” touch screen with icon-driven interface, streamlines operation. On-screen instructions provide fast, intuitive training; reduces service calls.
• Built-in Self Diagnostic System – Includes real-time feedback of the brewing process and energy saving mode.
• Field selectable for 0.5, 1.0 or 1.5 gal. (1.9, 3.8 or 5.7 L) batch brewing.
• IntelliFresh® Technology – Temperature and time information follows the satellite.
• LED notim cation of freshness timing.
• Industry’s most effective mineral tolerant design.
• Fast-Flow hot water faucet
• Preloaded Recipes
• USB Port Provides Quick and Easy Updates

DIMENSIONS

Height (in.) 34.480”

Width (in.) 10.500”

Depth (in.) 26.440”

ELECTRICAL

Phase 1/1

Volts 120/220

Amps 13.5/13.5

Heat Configuration 2x1600

Wire 2W+G/3W+G

Watts 1650/2800

Hertz 50/60

This is a dual voltage item that can be used in 120 or 220 Volts. Amperage and wire specifications need to match according to the voltage being used. If you have any questions, please contact a licensed electrician for clarification on what your facility requires. Refer to specifications above for clarification on the requirements.

WATER

Connector 3/8” Flare

Pressure 20-90 psi

Min. Flow Rate 1.0 GPM

Tank Volume 2.2 Gal

SHIPPING

Ship Height (in.) 34.50”

Ship Width (in.) 15.30”

Ship Depth (in.) 31.50”

Ship Weight 75 lbs

Ship Cube 9.60 cuft

GENERAL

Certification: UL/ NSF

Warning: Proposition 65 Warning — Applies to the State of California Only. LEARN MORE >

Installation Requirements

1. A secure surface capable of supporting the weight of the appliance.
2. For units without an attached cord set: Appropriately sized, UL listed, grounding type power cable to meet the electrical specifications for the appliance. If you have questions about the correct cable size and length, consult a qualified installer. If the unit will be hard wired to a junction box, the power cable must be long enough so that it can be moved for cleaning underneath.
3. A grounded electrical connection to an electrical circuit that meets the electrical specifications of the appliance (see SPECIFICATIONS). The circuit must be protected by the appropriate sized circuit breaker. If you are not certain that the existing circuit meets the requirements for your unit, consult a licensed electrician.
4. A water filtration system is required to maintain trouble-free operation.
5. Potable water supply line connection from the water filter capable of supplying the minimum flow rate required by the specifications. The water supply line must be able to connect to the flare fitting on the back of the unit. See the SPECIFICATIONS section for the correct size. The water line should also be capable of being controlled by a shut off valve. Do not connect the water line to a saddle or needle valve.